|
Main |
|
|
Ctrl/Cmd + Shift + 1 through 4 |
Displays options dialogs: 1: General Options 2: Spectrum Options 3: I/O Meter Options 4: EQ Options Note: Under Mac OS X, 'Cmd+Shift+3' and 'Cmd+Shift+4' are taken by the operating system and cannot be used to open Nectar's Meter and EQ Options windows. |
|
Ctrl/Cmd + P |
Toggles Preset Manager |
|
Ctrl/Cmd + B |
Toggles bypass for all Nectar processing. |
|
EQ |
|
|
Alt/Opt + click |
Apply a bandpass filter at the mouse cursor to "solo" the frequencies under the cursor |
|
Ctrl/Cmd + click (Windows) Command + click (OS X) |
Selects multiple EQ bands to adjust them as one group |
|
Shift + click |
Constrain mouse movements (dragging an EQ band) in either the vertical or horizontal direction. |
|
Double click |
Double click on a band to reset it to its default position. |
|
Left/Right arrow keys |
Adjust the frequency of a selected band or bands. Use with Shift key for larger increments. |
|
Up/Down arrow keys |
Adjust the gain of a selected band or bands. Use with Shift key for larger increments. |
|
Alt/Opt + up/down arrow keys |
Changes the filter type (bell, lowpass, highpass, etc.) for the selected band. |
|
Alt/Opt + left/right arrow keys |
Select the next or previous EQ band. |
|
Ctrl/Cmd + left/right arrow keys |
Adjust the Q of a selected band or bands. Use with Shift key for larger increments. |
|
Misc |
|
|
Ctrl/Cmd + Z |
Undo the last change made to a control. |
|
Ctrl/Cmd + Y |
Redo the last change made to a control. |
|
Esc |
Cancels dialog boxes. |
|
F1 |
Launch help |
|
F3 |
Toggle options dialog visibility |
|
F5 |
Toggle History visibility |
|
F6 |
Resets active panel |